Installation Instructions

FormNo.3432-840RevA

WheelWeightKit

Groundsmaster

3500SeriesRotaryMowerorReelsmaster3100

SeriesTractionUnit

ModelNo.136-3315

InstallationInstructions

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Wheelweight2

Wheel-weightadapter4

Threadedstud4

Washer4

Nut4

Installthewheelweight.

InstallingtheWheelWeight

Note:Installaweightoneachfrontwheel.

1.Parkthemachineonalevelsurface,lowerthe

cuttingunits,engagetheparkingbrake,shutoff

theengine,andremovethekey.

2.Determinethe2lugnutstoremovebyensuring

thatthevalvestemisnotcovered.

Important:Ensurethatthevalvestemofthe

tireisaccessiblethroughthewheel-weight

accesshole.

3.Removethe2lugnutsfromthemachine.

g290694

Figure1

1.Valvestemaccesshole3.Valvestem

2.Removetheselugnuts.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3432-840*A

PAGE 1
Form No. 3432-840 Rev A Wheel Weight Kit Groundsmaster® 3500 Series Rotary Mower or Reelsmaster 3100 Series Traction Unit Model No. 136-3315 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. Wheel weight Wheel-weight adapter Threaded stud Washer Nut 2 4 4 4 4 Install the wheel weight. Installing the Wheel Weight Note: Install a weight on each front wheel. 1.
PAGE 2
4. Install the threaded studs into the wheel-weight adapters until they bottom out (Figure 2). 5. Install the adapter assemblies onto the wheel studs where the lug nuts were removed (Figure 2). g290692 Figure 2 1. Adapter 3. Wheel 2. Threaded stud 4. Adapter assemblies 6. Torque the adapter assemblies between 95 and 115 N∙m (70 and 85 ft-lb). 7. Secure the weight to the wheel with 2 washers and 2 nuts (Figure 3). 8. Torque the nuts between 95 and 115 N∙m (70 and 85 ft-lb).