Installation Instructions

FormNo.3407-926RevA

HydraulicCapLockKit

GrandStand

Mower

ModelNo.136-5420

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

Placethecaplockoverthehydraulic-tankcapintheorientationshowninthegure.Securethecaplockusingtheself-tapping

screw.

Note:Youdonotneedtodrillaholepriortoinstallingtheself-tappingscrew.

Important:Youmustinstalltheself-tappingscrewtowardtherearofthemachine,otherwiseyoucoulddamage

thehydraulictank.

1.Self-tappingscrew

3.Hydraulic-tankcap

2.Caplock4.Directiontowardthefrontofthemachine

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3407-926*A

PAGE 1
Form No. 3407-926 Rev A Hydraulic Cap Lock Kit GrandStand® Mower Model No. 136-5420 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Place the cap lock over the hydraulic-tank cap in the orientation shown in the figure. Secure the cap lock using the self-tapping screw. Note: You do not need to drill a hole prior to installing the self-tapping screw.