Installation Instructions

FormNo.3415-421RevA

BucketMountKit

TimeCutter

HDRidingMower

ModelNo.136-7494

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia

tocausecancer,birthdefects,orreproductiveharm.

Installation

PreparingtheMachine

1.Parkthemachineonalevelsurface.

2.Disengagetheblade-controlswitch.

3.Engagetheparkingbrake.

4.Movethemotion-controlleversoutwardtothe

NEUTRAL-LOCKposition.

5.Shutofftheengineandremovethekey.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3415-421*A

PAGE 1
Form No. 3415-421 Rev A Bucket Mount Kit TimeCutter® HD Riding Mower Model No. 136-7494 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Installation Preparing the Machine 1. Park the machine on a level surface. 2. Disengage the blade-control switch. 3. Engage the parking brake. 4. Move the motion-control levers outward to the NEUTRAL-LOCK position. 5.
PAGE 2
Installing the Bucket Mount Kit 3. Secure the bucket retainer to the engine guard using the carriage bolt (5/16 x 7/8 inch) and handle knob (Figure 3). 1. Secure the bracket to the engine guard using 2 flange-head bolts (5/16 x 3/4 inch) and 2 flange nuts (5/16 inch) as shown in Figure 1. g209905 Figure 3 1. Handle knob 2. Bucket retainer g212124 Figure 1 1. Flange-head bolt (5/16 x 3/4 inch) 3. Flange nut (5/16 inch) 2. Bracket 4. Engine guard 2.