Installation Instructions
FormNo.3410-325RevA
18inand22inStiffGroomingBrushKit
ModelNo.136-8406
ModelNo.136-8407
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Forgroomershaftassembly/disassemblyinstructions,refertotheUniversalGroomerDriveKit(Model03763/03768)
installationinstructions.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Groomingbrush
1
Springpin
2
Installthebrushontotheshaft.
InstallingtheGroomingBrush
ontotheGroomerShaft
1.Insertaspringpinintotheholeoneitherendofthe
groomershaftasshowninFigure1.
Note:Thespringpinmaynottintotheholeofan
oldergroomer.Ifneeded,useadrillbit(7/32inch)to
maketheholelarger.
g189730
Figure1
1.Springpin3.Groomingbrush
2.Groomershaft
2.Slidethegroomingbrushontothegroomershaft
(Figure1).
3.Usethesecondspringpintosecuretheotherendof
thegroomingbrushtothegroomershaft(Figure2).
g189731
Figure2
1.Springpin
©2016—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3410-325*A