Installation Instructions

FormNo.3419-261RevA

18inTransportConversionKit

forTransPro100

ModelNo.136-8567

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia

tocausecancer,birthdefects,orreproductiveharm.

Note:Determinetheleftandrightsidesofthe

machinefromthenormaloperatingposition.

Note:Retainallcomponentsforreuseunless

otherwisespecied.

1.Ifstandardinsertsareinstalledonyourtrailer,

removeanddiscardthem(Figure1).

g234208

Figure1

1.Discard

2.Removethefastenerssecuringthetrailerstops

andspacerstoeachsideofthetrailer(Figure

1).Discardeverythingexceptthetrailerstops.

Note:Ensurethatyouarenotdiscardingthe

trailerstopswhichlooksimilartothespacers.

3.Removethefastenerssecuringthewheelrods

andspringlatchestothetrailer(Figure1).

Discardthewheelrods.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3419-261*A

PAGE 1
Form No. 3419-261 Rev A 18in Transport Conversion Kit for Trans Pro 100 Model No. 136-8567 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Note: Determine the left and right sides of the machine from the normal operating position. Note: Retain all components for reuse unless otherwise specified. 1.
PAGE 2
g234209 Figure 2 1. Long trailer stop 4. Spacer 2. Carriage bolt (6 inches) 5. Locknut 3. Carriage bolt (4-3/4 inches) 6. Carriage bolt (3/4 inch) 4. 5. 6. 7. 8. 9. 7. Carriage bolt (2-1/4 inches) Using the 2 rear holes in each side insert, mount an insert to each side of the trailer with 2 carriage bolts (2-1/4 inches), 2 spacers, and 2 locknuts (Figure 2). Position the spacers between the insert and the side.