Installation Instructions

ManualsBrandsToro ManualsRiding EquipmentToro 137-2042

FormNo.3414-890RevA

HDShockandSpringKit

TimeCutter

HDRidingMower

ModelNo.137-2042

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia

tocausecancer,birthdefects,orreproductiveharm.

Installation

PreparingtheMachine

1.Parkthemachineonalevelsurface.

2.Disengagetheblade-controlswitch.

3.Engagetheparkingbrake.

4.Movethemotion-controlleversoutwardtothe

NEUTRAL-LOCKposition.

5.Shutofftheengineandremovethekey.

RemovingtheExistingRear

Springs

1.Removethecamlocknut(1/2inch)securingthe

topoftheexistingrearspring(Figure1).

Retainthecamlocknut(1/2inch).

2.Removetheangenut(3/8inch)securingthe

bottomoftheexistingrearspring(Figure1).

Retaintheangenut(3/8inch).

3.Removetheexistingrearspring(Figure1).

4.Repeatthisprocedureontheotherside.

g209520

Figure1

1.Camlocknut(1/2inch)3.Cam-lockleverinthe

lockedposition

2.Rearspring

4.Flangenut(3/8inch)

InstallingtheNewRear

Heavy-DutySprings

1.Installthenewrearspringusingthepreviously

removedcamlocknut(1/2inch)andangenut

(3/8inch)asshowninFigure1.

2.Withthecam-lockleverinthelockedposition,

torquethecamlocknut(1/2inch)to15to16

N∙m(135to145in-lb).

3.Repeatthisprocedureontheotherside.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3414-890*A

Summary of content (2 pages)

PAGE 1
Form No. 3414-890 Rev A HD Shock and Spring Kit TimeCutter® HD Riding Mower Model No. 137-2042 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Installation Preparing the Machine 1. Park the machine on a level surface. 2. Disengage the blade-control switch. 3. Engage the parking brake. 4.
PAGE 2
Removing the Existing Front Spring 1. Remove the 2 wheel bolts and 2 flange nuts (3/8 inch) securing the existing front spring (Figure 2). Retain the 2 wheel bolts and 2 flange nuts (3/8 inch). 2. Remove the existing front spring (Figure 2). g209519 Figure 2 Top of the front spring shown 1. Front spring 3. Wheel bolt 2.