Installation Instructions

ManualsBrandsToro ManualsRiding ProductsRear Light Kit, Greensmaster 3360 or 3370 eTriFlex Traction Unit

FormNo.3440-472RevB

RearLightKit

Greensmaster

3360or3370eTriFlexTractionUnit

ModelNo.137-7945

InstallationInstructions

Installation

PreparingtheMachine

NoPartsRequired

Procedure

1.Parkthemachineonalevelsurface.

2.Engagetheparkingbrake.

3.Lowerthecuttingunits.

4.Shutoffthemachineandremovethekey.

5.Disconnectthemain-powerconnectors;referto

yourmachineOperator’sManual.

InstallingtheLights

Partsneededforthisprocedure:

1Lightassembly

1Bracket

1U-bolt

Nut(3/8inch)

Procedure

1.Usethebolt,washer,andnutincludedwiththe

lightassemblytoinstallthelightonthebracket

asshowninFigure1.

g326364

Figure1

1.Light

5.Nut(includedwithlight

assembly)

2.Bolt(includedwithlight

assembly)

6.Washer(includedwith

lightassembly)

3.Bracket7.U-bolt

4.Nut(3/8inch)

2.Installthebracketontotherightsideofthe

rollbarusingaU-boltand2nuts(3/8inch)as

showninFigure1.

Note:Observethelengthofthewire-harness

connectorlabeledREARWORKLIGHT.Position

thelightinanareathatallowsthisconnectorto

beinstalledtothelight.

3.Removethecapfromtheconnectorlabeled

REARWORKLIGHTandconnectittothelight.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3440-472*

Summary of content (2 pages)

PAGE 1
Form No. 3440-472 Rev B Rear Light Kit Greensmaster® 3360 or 3370 eTriFlex Traction Unit Model No. 137-7945 Installation Instructions Installation 1 Preparing the Machine No Parts Required Procedure 1. Park the machine on a level surface. 2. Engage the parking brake. 3. Lower the cutting units. 4. Shut off the machine and remove the key. 5. Disconnect the main-power connectors; refer to your machine Operator’s Manual.
PAGE 2
3 Completing the Installation No Parts Required Procedure 1. Connect the main-power connectors; refer to your machine Operator’s Manual. 2. Use the switch (Figure 2) to test if the rear light is functioning: • Moving the switch to the RIGHT position activates the headlights and rear light). • Moving the switch to the MIDDLE position turns off the lights. • Moving the switch to the LEFT position activates the headlights only. g287700 Figure 2 1. RIGHT position 3. LEFT position 2.