Installation Instructions

FormNo.3430-406RevA

BagKit

Greensmaster

3000SeriesTriFlex

oreTriFlexTractionUnit

ModelNo.137-8130

InstallationInstructions

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Nopartsrequired

–

Preparethemachineforinstallation.

Bag1

Rod1

Bracket1

U-bolt1

Locknut(3/8inch)

Installthebagkit.

PreparingtheMachine

1.Parkthemachineonalevelsurface.

2.Lowerthecuttingunits.

3.Engagetheparkingbrake.

4.Shutofftheengineormotorandremovethekey.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3430-406*A

PAGE 1
Form No. 3430-406 Rev A Bag Kit Greensmaster® 3000 Series TriFlex® or eTriFlex Traction Unit Model No. 137-8130 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. No parts required – Prepare the machine for installation. Bag Rod Bracket U-bolt Locknut (3/8 inch) 1 1 1 1 2 Install the bag kit. Preparing the Machine 1. Park the machine on a level surface. 2. Lower the cutting units. 3.
PAGE 2
Installing the Bag Kit 1. 3. Insert the rod into the bag (Figure 1). Secure the bag assembly to the lower portion of the roll bar using the U-bolt and 2 locknuts (3/8 inch) as shown in Figure 3. g285997 Figure 1 1. Rod 2. 2. Bag Install the ends of the rod into the slots of the bag bracket (Figure 2). g285998 Figure 3 g285999 Figure 2 1. Rod ends inserted into the bag bracket 2 1. U-bolt 3. Locknut (3/8 inch) 2. Bag assembly 4.