Installation Instructions

3.Installtheguardplateusing2angebolts(5/16
x3/4inch),1carriagebolt(5/16x3/4inch)and
3locknuts(5/16inch)asshowninFigure8.
g239138
Figure8
1.Flangebolt—5/16x3/4
inch(2)
3.Guardplate
2.Locknut—5/16inch(3)4.Carriagebolt(5/16x3/4
inch)
4.Applythread-lockingcompoundtothebolt(1/4x
3/4inch)andusethebolt,washer(0.27x0.89x
0.09inches),andsquarekeytoinstallthefront
pulley,withthepulleyfaceushwiththeendof
theshaft(Figure9).T orquetheboltto13.6N∙m
(120in-lb).
g239137
Figure9
1.Setscrew4.Washer(0.27x0.89x0.09
inches)
2.Squarekey
5.Frontpulley
3.Bolt(1/4x3/4inch)
5.Applythread-lockingcompoundtothesetscrew,
andsecurethepulleywiththesetscrew,washer
(0.27x0.89x0.09inches),andbolt(1/4x3/4
inch)asshowninFigure9.Torquethesetscrew
to14.9to17.6N∙m(132to156in-lb).
6.Applythread-lockingcompoundtothebolt(5/16
x1-1/8inch)andusethebolt,2washers(0.76x
1.26x0.07inches),1washer(0.32x1.12x0.18
inches),1washer(0.31x0.78x0.07inches)
andthesquarekeytoinstalltheclutchpulley
(Figure10).T orquetheboltto22.6to28.2N∙m
(200to250in-lb).
g265325
Figure10
1.Washer(0.76x1.26x0.07
inches)
4.Washer(0.32x1.12x0.18
inches)
2.Clutchpulley5.Washer(0.31x0.78x0.07
inches)
3.Squarekey6.Bolt(5/16x1-1/8inch)
7.Installthebeltaroundthefrontpulleyandclutch
pulley(Figure13).
6