Installation Instructions

g017122
Figure5
1.Rightsidedrumdrive
cover
3.Rubbergrommet
2.Feltseal
•Removeanddiscardtherubbergrommet
fromtheaxleholeinthedrumcover(Figure
5).
•Afxthefeltsealtotheinsideofthecover
positioningitaroundtheaxlehole(Figure5).
•Installthecovertothemachine.
6.Insertarailwheelontoeachshaftwiththe
channelfacingoutwardandsecureitwitha
wheelclip(Figure6).
g014669
Figure6
1.Wheelshaft
3.Wheelclip
2.Railwheel(channelfacing
outward)
4
InstallingtheTie-Down
Straps
Partsneededforthisprocedure:
2Tie-downstraps
2
Shoulderbolt
2Washer
2
Nut(1/4inch)
Procedure
Use2shoulderbolts,2washers,and2nuts(1/4inch)
tosecurethetie-downstrapstotheramp(Figure7).
Note:Thereareexistingrivetsinthehardware
installationlocationsshowninFigure7.Remove
theserivets.
g290855
Figure7
1.Shoulderbolt
3.Tie-downstrap
2.Washer
4.Nut(1/4inch)
6