SDS

Safety Data Sheet
Toro Full Synthetic 10W30 Engine Oil
Revision Date: 8/22/19
Prepared according to Global Harmonized System (GHS) standards
SECTION 1
Product Trade Name:
CAS Number:
Synonyms/Other:
Recommended Use:
Restrictions on Use:
Created Date:
Preparation/Revision Date:
Emergency Phone Number:
SDS CODE:
SECTION 2
Appearance:
Odor:
Classification:
Target Organs:
Pictogram(s):
None required.
Signal Word:
Hazard Statement:
Other Hazards:
Prevention:
Response:
Storage Procedures:
Disposal:
Other:
SECTION 3
SECTION 4
Eye Contact:
Skin Contact:
Tel: 1-888-384-9939
10/16/2018
< 2%
None required.
P332+P313 - If skin irritation occurs: Get medical advice/attention
COMPOSITION OF INGREDIENTS
Percentage (by weight)
113706-15-3
CAS Number
Component
Zinc alkyl dithiophosphate
CHEMICAL PRODUCT IDENTIFICATION
None required.
None required.
See section 11 for complete health hazard information.
WARNING
H316 - Causes mild skin irritation
Not determined.
Blue
Not Determined
Engine Oil
N/A
Mixture
1-800-424-9300 (CHEMTREC)
8/22/2019
14732
HAZARD IDENTIFICATION
Skin
Skin corrosion / irritation category 3
Mild Petroleum
Toro, Inc
8111 Lyndale Ave S
Bloomington, MN 55420-1196
Avoid direct contact. Wear chemical protective clothing, if necessary. Wash skin with
lukewarm, gently flowing water and mild soap until product is removed. Call a doctor if
you feel unwell. If skin irritation or rash occurs: Get medical advice/attention.
If irritation occurs, cautiously rinse eyes with lukewarm, gently flowing water for 5
minutes, while holding the eyelids open. If eye irritation persists: Get medical
advice/attention.
The balance of components do not contribute to the overall classification of the fluid, according to the GHS Standard.
FIRST AID MEASURES
Toro Full Synthetic 10W30 Engine Oil
Page 1 of 6

Summary of content (18 pages)