Installation Instructions

ManualsBrandsToro ManualsAttachmentsBagger Enhancement Kit, Grandstand Mower

FormNo.3426-840RevB

BaggerEnhacementKit

Grandstand

Mower

ModelNo.139-1529

InstallationInstructions

Note:Inmostmowingconditions,usestandardhighliftcuttingbladeswhilebaggingleaveswiththiskit.In

dry,dustyconditions,usemediumliftorlowliftcuttingbladeswhilebaggingleavestopreventexcessive

blowoutofdebris.

ContactyourAuthorizedServiceDealerfortheproperbladesfordifferentmowingconditions..Refertothe

Operator’sManualforthecorrectproceduretoreplacetheblades.

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Nopartsrequired

–

Preparethemachine.

Leftrubberbafe

Rightrubberbafe

Leftskidskirt

Rightskidskirt1

Carriagebolt(5/16x1inch)

Locknut(5/16inch)

Carriagebolt(5/16x1-1/4inches)

Locknut(1/4inch)

Hex-headbolt(1/4x3/4inch)

Flat-headbolt(1/4x3/4inch)

Installthebafes.

PreparingtheMachine

1.DisengagethePTO,movethemotion-controlleverstotheNEUTRAL-LOCKposition,andengagethe

parkingbrake.

2.Shutofftheengine,removethekey,andwaitforallmovingpartstostopbeforeleavingtheoperating

position.

3.Repairallbentordamagedareasofmowerdeckandreplaceanymissingparts.

4.Cleanthemachineofanydebrisonthedecktoeaseinstallation.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

*3426-840*B

Summary of content (4 pages)

PAGE 1
Form No. 3426-840 Rev B Bagger Enhacement Kit Grandstand® Mower Model No. 139-1529 Installation Instructions Note: In most mowing conditions, use standard high lift cutting blades while bagging leaves with this kit. In dry, dusty conditions, use medium lift or low lift cutting blades while bagging leaves to prevent excessive blowout of debris. Contact your Authorized Service Dealer for the proper blades for different mowing conditions..
PAGE 2
Installing the Baffles 1. Cut the rubber baffle lengths to fit your specific deck size as shown in Figure 1. Trim the baffles at the first marking for 52 inch decks or at the second marking for 48 inch decks. Note: The baffle length is correct for 60 inch decks and does not need to be shortened. g275101 Figure 1 1. First marking (52 inch decks) 5. Cutting arc (60 inch decks) 2. Second marking (48 inch decks) 6. Right baffle 3. Cutting arc (52 inch decks) 7. Left baffle 4.
PAGE 3
4. Attach the right skid skirt to the right rubber baffle using a carriage bolt (5/16 x 7/8 inch) and nut (5/16 inch) as shown in Figure 3. g275193 Figure 3 4. Right skid skirt 1. Nut (5/16 inch) 2. Nut (1/4 inch) 5. Carriage bolt (5/16 x 7/8 inch) 3. Right rubber baffle 6. Hex-head or flat-head bolt (1/4 x 3/4 inch) 5. Secure the right side of the rubber baffle and skid skirt together as shown in Figure 3.
PAGE 4
6. Secure the rubber baffles and skid skirts to the deck using carriage bolts (5/16 x 1 inch) and locknuts (5/16 inch) as shown in Figure 3. Note: Use 12 bolts and 12 locknuts for 60 inch decks; 48 inch and 52 inch decks will require fewer fasteners. g275200 Figure 5 60-inch deck shown 1. Right rubber baffle and skid skirt 4. Left skid skirt 2. Locknut (5/16 inch) 5. Carriage bolt (5/16 x 1 inch) 3.