Installation Instructions

ManualsBrandsToro ManualsSnowthrowersSnow Cab Kit, Power Max HD Commercial Snowthrower

FormNo.3431-497RevA

SnowCabKit

PowerMax

HDCommercialSnowthrower

ModelNo.139-1640

InstallationInstructions

Installation

InstallingtheFrame

Partsneededforthisprocedure:

Leftmountingbracket

1Rightmountingbracket

2Frontpost

Horizontalframe

Rearframe

Topframe

4Ubracket

Bolt(1/4x5/8inch)

Bolt(1/4x3/4inch)

Bolt(1/4x1inch)

Bolt(1/4x4inches)

Bolt(1/4x4-1/2inches)

4Largewasher

Smallwasher

12Locknut

6Roundplasticcap

Squareplasticcap

Procedure

1.Removethesnow-cleanouttoolfromthe

machine.

2.Installtherightandleftmountingbracketsonto

theframeasshowninFigure1.

g287902

Figure1

1.Squareplasticcap(2)6.Smallwasher(12)

2.Bolt,1/4x4-1/2inches(2)7.U-bracket(4)

3.Rightmountingbracket

8.Leftmountingbracket

4.Roundplasticcap(4)9.Bolt,1/4x4inches(2)

5.Locknut(4)

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3431-497*A

Summary of content (4 pages)

PAGE 1
Form No. 3431-497 Rev A Snow Cab Kit Power Max® HD Commercial Snowthrower Model No. 139-1640 Installation Instructions Installation Procedure 1 1. Remove the snow-cleanout tool from the machine. 2. Install the right and left mounting brackets onto the frame as shown in Figure 1.
PAGE 2
3. Install the front posts and horizontal frame onto the left and right mounting brackets as shown in Figure 2. g288038 Figure 3 1. Bolt, 1/4 x 1 inch (2) 4. Locknut (2) 2. Large washer (4) 5. Round plastic cap (2) 3. Rear frame g288014 Figure 2 1. Horizontal frame 3. Bolt, 1/4 x 3/4 inch (2) 2. Locknut (2) 4. Front post (2) 4. 5. Install the top frame onto the front posts and rear frame as shown in Figure 4. Install the rear frame onto the mounting brackets as shown in Figure 3.
PAGE 3
2 Installing the Cover Parts needed for this procedure: 1 Cover Procedure Unfold and install the cover over the frame. Secure it to the frame using the Velcro® brand hook-and-loop fastener tabs. g288052 Figure 5 7. Tighten all bolts. 8. Install the snow-cleanout tool onto the machine.
PAGE 4