Installation Instructions

FormNo.3435-923RevA

Slow-MovingVehicleKit

Groundsmaster

3200or3300SeriesTractionUnit

ModelNo.139-2339

InstallationInstructions

Installation

PreparingtheMachine

NoPartsRequired

Procedure

1.Parkthemachineonalevelsurface.

2.Engagetheparkingbrake.

3.Lowerthecuttingunit.

4.Shutofftheengineandremovethekey.

InstallingtheSign

Partsneededforthisprocedure:

Slow-movingvehiclesign

Signmount

2Bottommount

Flatwasher

Flange-headbolt(1/4x3/4inch)

Locknut(1/4inch)

Procedure

1.Remove4plasticrivetsfromthehoodasshown

inFigure1.

g307903

Figure1

1.Plasticrivets

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3435-923*A

PAGE 1
Form No. 3435-923 Rev A Slow-Moving Vehicle Kit Groundsmaster® 3200 or 3300 Series Traction Unit Model No. 139-2339 Installation Instructions 2 Installation 1 Installing the Sign Preparing the Machine Parts needed for this procedure: No Parts Required Procedure 1. Park the machine on a level surface. 2. Engage the parking brake. 3. Lower the cutting unit. 4. Shut off the engine and remove the key.
PAGE 2
. Align the sign mount to the hood in the same location as plastic rivets removed in step 1 (Figure 2). 3. Install the sign mount using 4 flange-head bolts (1/4 x 3/4 inch) on top of the hood, and 2 bottom mounts and 4 locknuts (1/4 inch) on the bottom of the hood (Figure 2). 4. Install the slow-moving vehicle sign as shown in Figure 3. g307963 g307919 Figure 3 Figure 2 1. Flange-head bolts (1/4 x 3/4 inch) 3. Bottom mount 1. Flange-head bolts (1/4 x 3/4 inch) 2. Sign mount 4.