Installation Instructions

FormNo.3433-275RevA

WirelessHourMeterKit

Greensmaster

1018,1021,or1026Mower

ModelNo.139-4369

InstallationInstructions

PreparingtheMachine

1.Parkthemachineonalevelsurface.

2.Engagetheparkingbrake.

3.Shutofftheengine.

4.Removethespark-plugwirefromthesparkplug;

refertoyourmachineOperator’sManual.

InstallingtheKit

1.Installthemount,mountplate,andregulator

tothereartubeframeusing2angenutsas

showninFigure1.

Important:Installtheringterminalfromthe

regulatorconnectorbetweentheregulator

andthemountplate(Figure1).

g285473

Figure1

1.Flangenuts4.Ringterminal

2.Regulator5.Mount

3.Mountplate

2.Connecttheregulatorconnectortothewireless

hourmeterkitwireharness(Figure2).

g285913

Figure2

1.WHMharness—single

connectors

4.Regulatorconnector

2.WHMharness—WHM

connector

5.Regulator

3.WHMharness—regulator

connector

3.Removeanddiscardthemountingbrackets

fromthefaceoftheWHM.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3433-275*A

PAGE 1
Form No. 3433-275 Rev A Wireless Hour Meter Kit Greensmaster® 1018, 1021, or 1026 Mower Model No. 139-4369 Installation Instructions Preparing the Machine 2. 1. Park the machine on a level surface. 2. Engage the parking brake. 3. Shut off the engine. 4. Remove the spark-plug wire from the spark plug; refer to your machine Operator’s Manual. Connect the regulator connector to the wireless hour meter kit wire harness (Figure 2). Installing the Kit 1.
PAGE 2
4. Connect the wireless hour meter to the WHM kit harness (Figure 3). 6. Connect the wireless hour meter wire harness to the engine as follows: For machines with the Light Kit not equipped: • Connect the wire-harness end labeled J01 to the white end of the engine wire harness. • Connect the wire-harness end labeled J02 to the green end of the main wire harness. g285847 • Connect the wire-harness end labeled J03 to Figure 3 1. WHM harness — WHM connector engine mounting bolt as a ground. 2.
PAGE 3
Declaration of Incorporation The Toro Company, 8111 Lyndale Ave. South, Bloomington, MN, USA declares that the following unit(s) conform(s) to the directives listed, when installed in accordance with the accompanying instructions onto certain Toro models as indicated on the relevant Declarations of Conformity. Model No. 139-4369 Serial No.
PAGE 4