Installation Instructions
InstallingtheTie-Down
Straps
1.Securethe2tie-downstrapstothetrailerusing
the2shoulderbolts,2atwashers,and2
locknuts(Figure8).
g285658
Figure8
1.Tie-downstrap3.Flatwasher
2.Shoulderbolt
4.Locknut
2.Usethelugnutstoinstallthewheelassemblies
totheaxles(Figure1).
3.Torquethelugnutsto108N∙m(80ft-lb).
4.Lowerthetrailerandremovethestands.
ConvertingtheTrailer
Conguration
Optional
Convertingfrom18inchesto21
inches
Note:IfyourTransPro100traileriscongured
foradifferentwidthwalkgreensmower,additional
parts(soldseparately)andinstallationinstructionsare
required.
Note:Retainallcomponentsforreuseunless
otherwisespecied.
Forthisconversion,youwillneedtopurchasethe
followingparts:
•1hex-headbolt(3/8x3-1/4inches)
•1hex-headbolt(3/8x4-3/4inches)
•2locknuts(3/8inch)
1.Removethesiderailinsertsandfasteners.
Retainthefrontwheelstopspacers.
2.Installthesiderailinsertsusingthehex-head
bolt(3/8x3-1/4inches),hex-headbolt(3/8x
4-3/4inches),and2locknuts(3/8inch).
3.Completetheinstallationinstructionsforthe
Greensmaster1021RodReplacementKit.
4