Installation Instructions

FormNo.3431-770RevA

SeatInstallationKit

Greensmaster

3000SeriesTriFlex

TractionUnit

ModelNo.139-6479

InstallationInstructions

Note:ThiskitmustbeinstalledwhenyouareinstallingseatModelNo.04508ontomodelyear2018or

oldertractionunits.

Installation

PreparingtheMachine

NoPartsRequired

Procedure

1.Parkthemachineonalevelsurface.

2.Engagetheparkingbrake.

3.Shutofftheengineandremovethekey.

RemovingtheExistingSide

Cover

NoPartsRequired

Procedure

Toremovetheexistingcoverontherightsideofthe

machine,loosenandremovetheboltsthatsecurethe

covertothechassis(Figure1).Retainthebolts.

g286522

Figure1

1.Bolt

2.Sidecover

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3431-770*A

PAGE 1
Form No. 3431-770 Rev A Seat Installation Kit Greensmaster® 3000 Series TriFlex® Traction Unit Model No. 139-6479 Installation Instructions Note: This kit must be installed when you are installing seat Model No. 04508 onto model year 2018 or older traction units. 2 Installation 1 Preparing the Machine Removing the Existing Side Cover No Parts Required No Parts Required Procedure Procedure 1. Park the machine on a level surface. 2. Engage the parking brake. 3.
PAGE 2
3 4 Installing the Side Cover Installing the Spacer Plate Parts needed for this procedure: Parts needed for this procedure: 1 1 Side cover Spacer plate Procedure Procedure Use the previously-removed bolts to install the new side cover to the chassis on the right side of the machine (Figure 2). Use the existing carriage bolts to install the spacer plate between the armrest and armrest bracket (Figure 3). g286520 Figure 3 1. Armrest 2. Spacer plate g286521 Figure 2 1. Bolt 2.