Service Manual

CHASSIS

3-40 LX Lawn Tractor Service Manual

Fig 156 PICT-7132

Fig 158 PICT-7127a

6. Install the two sets of fasteners securing the brake

pedal lever to the brake control assembly (Fig. 156):

8. Install the bolt, nut and washer securing the right

side of the fender to the frame and tighten (Fig. 158).

Fig 157 PICT-7130

Fig 155 PICT-7131a

7. Begin securing the fender to the frame by installing

2 screws located under the danger decal (Fig. 157).

Glue the cut decal pieces into place or replace the

decal.

5. Raise the fender and prop it slightly to access the

fasteners securing the brake pedal to the brake

control assembly (Fig. 155).

A. Torx screw and washer

B. Hex head bolt, washer and nut