Service Manual

MOWER DECK

7-76 LX Lawn Tractor Service Manual

2. Slide the cutting deck (from the right side) under-

neath the tractor (Fig. 839).

4. Place blocks under the rear of the mower deck to

raise it up.

5. Lower the lift lever to the lowest height-of-cut setting

(Fig. 841).

Fig 839 PICT-9765

Fig 841 PICT-9768

3. Slide the cutting deck toward the front of the tractor

allowing the hooks on the deck to hook onto the

deck stabilizer rod (Fig. 840).

Note: Ensure the ﬂ anges on the stabilizer rod are on

the inside of the hooks on the deck.

Fig 840 PICT-9771

50” Mower Deck Installation

1. Raise the lift lever to the highest height-of-cut setting

(Fig. 838).

Fig 838 PICT-9766