Service Manual

HYDROSTATIC DRIVE SYSTEM

6-7LX Lawn Tractor Service Manual

Installation

29. Remove 4 nuts from the 4 bolts securing the trans-

mission to the frame (Fig. 510).

1. As required, install parts on the transaxle to place

it in “as removed” condition. Raise the hydro trans-

mission into position (Fig. 512).

Fig 510 PICT-7560

Fig 512 PICT-7563

2. Loosely install 4 self tapping bolts (2 on each side)

to secure the transmission support bracket to the

frame (Fig. 513).

30. Remove the 4 bolts, mounting bolts and spacers and

carefully lower the transmission. Remove it from the

frame (Fig. 511).

Fig 513 PICT-7558

Fig 511 PICT-7563