Service Manual

GEAR DRIVE SYSTEM

5-13LX Lawn Tractor Service Manual

7. Slide the wheel onto the axle (Fig. 481).

9. Lower the machine so all tires are on the ground.

10. Install the hub cap (Fig. 483).

Fig 481 PICT-9611

Fig 483 PICT-9608

11. Check the brake operation. Refer to “Brake Adjust-

ment – Gear Drive” following.

8. Install the washer and bolt securing the wheel to the

axle (Fig. 482).

Fig 482 PICT-9609

6. Insert a .011” (.28mm) feeler gauge in between

the outer puck and the disc. Tighten or loosen the

adjusting hex nut until the proper gap is achieved

(Fig. 480).

Fig 480 PICT-9660