Service Manual

CHASSIS

3-84 LX Lawn Tractor Service Manual

Fig 323 PICT-7221

Before making a neutral adjustment, the transmission

must be warmed up for at least 10 minutes.

1. Loosen the bolt and washer retaining the right side

wheel to the right side axle (Fig. 323).

Neutral Adjustment - Hydrostatic

Models

Fig 325 PICT-7599

4. Locate the neutral adjusting puck and loosen the

Allen head bolt. If it’s difﬁ cult to loosen, heat the

aluminum housing near the bolt with a propane torch

(Fig. 325).

Fig 324 PICT-7597

2. Raise and support the right rear end of the tractor to

permit removing the right rear tire. Make sure the left

rear tire stays on the ground.

3. Remove the bolt, washer and wheel assembly from

the right axle (Fig. 324).

A. Adjusting puck