Operator's Manual

1. Remove the two hex screws and nuts from the seat

pivot bracket.

2. Align the front holes of the seat mounting bracket

with the holes in the seat pivot bracket on your

tractor and secure with previously removed hex

screws and nuts. See Figure 3.

3. To adjust the position of the seat loosen the knob

on the bottom of the seat. See Figure 3. Slide the

seat forward or backward as desired. Retighten the

knob.

Figure 3

Shipping Brace Removal

WARNING: Make sure the riding mower’s

engine is off, set the parking brake and

remove the ignition key before removing the

shipping brace

• Locate the shipping brace, if present, and warning

tag found on the right side of the cutting deck. See

Figure 4.

• While holding the discharge chute with your left

hand, remove the shipping brace with your right

hand by grasping it between your thumb and index

finger and rotating it clockwise.

Figure 4

WARNING: The shipping brace, used for

packaging purposes only, must be removed

and discarded before operating your riding

mower.

WARNING: The mowing deck is capable of

throwing objects. Failure to operate the riding

mower without the discharge cover in the

proper operating position could result in

serious personal injury and/or property

damage.