Installation Instructions

FormNo.3435-807RevA

WireHarnessKit

Groundsmaster

360,4000,5900,orReelmaster

5010Series

TractionUnitwith2PostROPSExtension

ModelNo.140-1555

InstallationInstructions

Installthewireharnesskittothe2-postROPSextensionwhenyouneedtoprovidepowertoelectrical

accessories.

PreparingtheMachine

1.Movethemachinetoalevelsurface.

2.Lowerallattachments.

3.Settheparkingbrake,shutofftheengine,andwaitforallmovingpartstostopbeforeyouleavethe

machine.

4.Removethekey.

5.Ensurethatthemachineissecurefrommovementbeforeyoubegintheinstallation.

6.Disconnectthenegative(–)cablefromthebattery.

RemovingtheTop

g036137

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3435-807*A

PAGE 1
Form No. 3435-807 Rev A Wire Harness Kit Groundsmaster® 360, 4000, 5900, or Reelmaster® 5010 Series Traction Unit with 2 Post ROPS Extension Model No. 140-1555 Installation Instructions Install the wire harness kit to the 2-post ROPS extension when you need to provide power to electrical accessories. Preparing the Machine 1. Move the machine to a level surface. 2. Lower all attachments. 3.
PAGE 2
Installing the Fuse Block 2x 2x g036564 Installing the Bracket 1x 2x 2x g306469 Figure 3 2
PAGE 3
Installing the Ground Block 1x 1x 2x 2x g036565 3
PAGE 4
Routing and Securing the Wire Harness 10x g036573 4
PAGE 5
Connecting the Wire Harness to the Ground Block g036572 Connecting the Wire Harness and Battery g036574 Installing the Top g036137 5
PAGE 6
Notes:
PAGE 7
Notes:
PAGE 8