Installation Instructions

ManualsBrandsToro ManualsRiding ProductsJack Mount Kit, Titan Riding Mower with Wide Frame

FormNo.3436-885RevA

JackMountKit

forTitan

RidingMowers

ModelNo.140-2067

ModelNo.140-5124

InstallationInstructions

Safety

SafetyandInstructional

Decals

Safetydecalsandinstructionsare

easilyvisibletotheoperatorandare

locatednearanyareaofpotential

danger.Replaceanydecalthatis

damagedormissing.

decal127-6663

127-6663

1.Warning—readthe

Operator'sManual.

2.Crushinghazard—engage

theparkingbrake,shutoff

theengine,andremove

thekey;supportthe

machineusingjackstands.

Installation

Determinetheleftandrightsidesofthemachinefrom

thenormaloperatingposition.

1.Parkthemachineonalevelsurface,

disengagetheblade-controlswitch,movethe

motion-controlleversoutwardtotheNEUTRAL

position,andengagetheparkingbrake.

2.Shutofftheengine,removethekey,andwait

forallmovingpartstostopbeforeleavingthe

operatingposition.

3.Securethejackmounttotheleftfrontaxle-tube

using2U-boltsand4angenuts(Figure1).

g202309

Figure1

1.U-bolt3.Jackmount

2.Flangenut

4.Leftfrontaxle-tube

4.Torquethefastenersto22.5N∙m(200in-lb).

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3436-885*A

Summary of content (2 pages)

PAGE 1
Form No. 3436-885 Rev A Jack Mount Kit for Titan® Riding Mowers Model No. 140-2067 Model No. 140-5124 Installation Instructions Safety Installation Safety and Instructional Decals Determine the left and right sides of the machine from the normal operating position. Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. 1.
PAGE 2
Operation Using the Jack Mount WARNING The machine could fall onto someone and cause serious injury or death. • Do not keep the machine raised on the jack for extended periods of time. • Always use a jack on a level surface. • Ensure that the jack is secured properly to the jack mount using a jack pin. • Do not rely solely on the jack for support. Use adequate jack stands or equivalent support. g202641 Figure 2 • Do not mount or dismount the mower while the jack is raised. 1. Jack mount 2.