Installation Instructions

4
InstallingtheCovers
Partsneededforthisprocedure:
1
Cylindercover
1Hosecover
5
Bolt(1/4x1inch)
5
Nut(1/4inch)
1Hydrauliccover
Procedure
1.Installthehosecoveraroundthehoses,withthe
taperedendup(Figure10).
g323098
Figure10
1.Hosecover
2.Bolt(1/4x1inch)andnut
(1/4inch)
2.Aligntheholesonthebottomofthecoverwith
theholesintheframe.Adhereittothehookand
loopfastenerstrip.
3.Securethecoverusingtheleftbracket,2bolts
(1/4x1inch),and2nuts(1/4inch)asshown
inFigure10.
4.Securethecovertothehosesusingthecable
tie.
5.Aligntheholesinthecylindercoverwiththe
holesintheframeandadhereittothehookand
loopfastenerstrips(Figure11).
Note:Thetaperedendofthecoverextends
overthecylinderrod.
g322789
Figure11
Cylindercoverattachedtoframefastenerstrips
6.Wrapthelongerlengthsofthecoverbetween
thehydrauliccylinderandgrinderpivotand
adherethemtogether(Figure12).
g322790
Figure12
1.Longerlengthoncylindercover
5