Installation Instructions

ManualsBrandsToro ManualsAttachmentsMount Kit, Titan Riding Mower

FormNo.3436-903RevA

MountKit

forTitan

RidingMowers

ModelNo.140-5125

InstallationInstructions

Safety

•Becomefamiliarwiththesafeoperationofthe

equipment,withtheoperatorcontrols,andsafety

signs.

•Useextracarewithgrasscatchersorother

attachments.Thesecanchangetheoperating

characteristicsandthestabilityofthemachine.

•Followthemanufacturer'srecommendations

foraddingorremovingwheelweightsor

counterweightstoimprovestability.

•Donotuseagrasscatcheronsteepslopes.A

heavygrasscatchercouldcauselossofcontrol

oroverturnthemachine.

•Slowdownanduseextracareonhillsides.Be

suretotravelintherecommendeddirectionon

hillsides.Turfconditionscanaffectthestabilityof

themachine.Useextremecautionwhileoperating

neardrop-offs.

•Keepallmovementonslopesslowandgradual.

Donotmakesuddenchangesinspeed,direction,

orturning.

•Thegrasscatchercanobstructtheviewtothe

rear.Useextracarewhenoperatinginreverse.

•Usecarewhenloadingorunloadingthemachine

intoatrailerortruck.

•Neveroperatewiththedischargedeectorraised,

removedoraltered,unlessusingagrasscatcher.

•Keephandsandfeetawayfrommovingparts.Do

notmakeadjustmentswiththeenginerunning.

•Parkthemachineonlevelground,disengage

thedrives,andshutofftheenginebeforeleaving

theoperator'spositionforanyreasonincluding

emptyingthegrasscatcheroruncloggingthe

chute.

•Ifyouremovethegrasscatcher,besuretoinstall

anydischargedeectororguardthatmighthave

beenremovedtoinstallthegrasscatcher.Donot

operatethemowerwithouteithertheentiregrass

catcherorthegrassdeectorinplace.

•Donotleavegrassinthegrasscatcherfor

extendedperiodsoftime.

•Grasscatchercomponentsaresubjecttowear,

damageanddeterioration,whichcouldexpose

youtomovingpartsorallowobjectstobethrown.

Frequentlycheckcomponentsandreplacewith

themanufacturer'srecommendedparts,when

necessary.

TowingSafety

•Donotattachtowedequipmentexceptatthehitch

point.

•Followtheattachmentmanufacturer's

recommendationforweightlimitsfortowed

equipmentandtowingonslopes.

•Neverallowchildrenorothersinorontowed

equipment.

•Onslopes,theweightofthetowedequipmentmay

causelossoftractionandlossofcontrol.Reduce

towedweightandslowdown.

•Stoppingdistanceincreaseswiththeweightofthe

towedload.Travelslowlyandallowextradistance

tostop.

•Makewideturnstokeeptheattachmentclearof

themachine.

•Donottowaloadthatweighsmorethanthe

towingmachine.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3436-903*A

Summary of content (4 pages)

PAGE 1
Form No. 3436-903 Rev A Mount Kit for Titan®Riding Mowers Model No. 140-5125 Installation Instructions Safety • Become familiar with the safe operation of the • • • • • • • • • • • • • equipment, with the operator controls, and safety signs. Use extra care with grass catchers or other attachments. These can change the operating characteristics and the stability of the machine. Follow the manufacturer's recommendations for adding or removing wheel weights or counterweights to improve stability.
PAGE 2
Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. Stabilizer bracket Carriage bolt (5/16 x 3/4 inch) Locknut (5/16 inch) Self-tapping screw (5/16 x 3/4 inch) Bolt (5/16 x 1 inch) Pivot frame Hairpin cotter Rod Washer 1 2 4 2 2 1 2 2 2 Use the chart below to verify that all parts have been shipped. Loose Parts 1. Remove the existing 2 bolts, 2 nuts, and hitch bracket from the bottom of the engine guard (Figure 1). g308799 Figure 2 1.
PAGE 3
g302477 g308335 Figure 3 1. Locknut (5/16 inch) 5. Figure 5 Left side shown 2. Bolt (5/16 x 1 inch) Position the pivot frame upward, and secure the pivot frame to the bottom of the machine frame using 2 self-tapping screws (5/16 x 3/4 inch) as shown in Figure 4. 8. g308797 Figure 4 1. Self-tapping screw (5/16 x 3/4 inch) 6. Tighten the 2 bolts (5/16 x 1 inch) and 2 locknuts (5/16 inch) as shown in . 7.
PAGE 4
Operation Note: Determine the left and right sides of the machine from the normal operating position. WARNING To avoid personal injury, follow these procedures: • Become familiar with all operating and safety instructions in the Operator's Manual for the machine before using this attachment. • Always shut the engine off and wait for all moving parts to stop before clearing an obstruction from the bagging system. • Never do maintenance or repairs while the engine is running.