Installation Instructions

g346930
Figure29
Rightsidegroomerboxshown
1.Air-ventplug3.Drainplug
2.Fillplug
RemovingtheGroomer
DriveBox
Note:Retainallremovedpartsforlaterinstallation
unlessotherwisestated.
Important:Ifyouhaveanyissuesremovingthe
groomerdrivebox,refertoyourtractionunit
ServiceManualorcontactyourauthorizedToro
distributor.
1.Removethecapfromthegroomer.
2.Removetheclampboltsconnectingthegroomer
tothedrivebox(Figure17).
3.Removetheshoulderboltandhardenedwasher
connectingthegroomerdriveboxtotheadjuster
arm(Figure30).
g346932
Figure30
1.Shoulderbolt3.Groomerdrivehex-head
2.Hardenedwasher
4.Reinforcementscrew
4.Restrainthereelforremoval;refertoRestraining
theReelforRemovingThreadedInserts(page
21).
5.Installthereinforcementscrew(PartNo.
1-803022—soldseparately)totheinternal
threadsofthegroomerdrivehexheadand
torqueto13.5N⋅m(120in-lb)asshownin
Figure30.
6.Removethegroomerdriveboxfromthecutting
reelbyturningthegroomerdrivehex-head
(Figure30).
Important:Ifthegroomerdriveboxis
installedontherightsideofacutting
unit,turnthegroomerdrivehex-head
counter-clockwise(right-handthread)to
removethedrive-boxshaftfromcuttingunit.
Important:Ifthegroomerdriveboxis
installedontheleftsideofacuttingunit,
turnthegroomerdrivehex-headclockwise
(left-handthread)toremovedrive-boxshaft
fromcuttingunit
Important:Youmustusea6-pointsocket
withheavywall.
20