Installation Instructions

FormNo.3444-948RevA

TransmissionReplacementKit

Greensmaster

e1021andeFlex

1021SeriesGreensmower

ModelNo.140-9327

InstallationInstructions

Installation

PreparingtheMachine

NoPartsRequired

Procedure

1.Parkthemachineonalevelsurface.

2.Shutoffthemachine.

3.Disconnectthebattery;refertoyourmachine

Operator’sManual.

AddingFluidtothe

Transmission

Partsneededforthisprocedure:

473ml

(16

oz)

DexronVIsynthetictransmissionuid

Procedure

1.Removethebreatherventandadapterassembly

fromthetransmission(Figure1).

g352146

Figure1

1.Breatherventandadapter

assembly

2.Transmission

2.Add473ml(16oz)ofDexronVIsynthetic

transmissionuidintothetransmission.

3.Installthebreatherventandadapterassembly

(Figure1)andtightenitto12to15N∙m(110to

130in-lb).

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3444-948*

PAGE 1
Form No. 3444-948 Rev A Transmission Replacement Kit Greensmaster® e1021 and eFlex® 1021 Series Greensmower Model No. 140-9327 Installation Instructions 2 Installation 1 Preparing the Machine Adding Fluid to the Transmission Parts needed for this procedure: No Parts Required 473 ml (16 fl oz) Procedure 1. Park the machine on a level surface. 2. Shut off the machine. 3. Disconnect the battery; refer to your machine Operator’s Manual. Dexron VI synthetic transmission fluid Procedure 1.
PAGE 2
3 4 Removing the Brake Cable from the Transmission Installing the Transmission Parts needed for this procedure: 1 No Parts Required Procedure 1. 2. 3. Removing the Existing Transmission Loosen the front cable jam nut (Figure 2) that secures the brake cable to the casting slot on the transmission assembly. Remove the brake cable from the slot. For instructions to remove the transmission, refer to the Removing the Transmission Gear Box Assembly procedure in your traction unit Service Manual.