Installation Instructions

7.Usingthesupportbracketasaguide,drill2
holes(17/32inchdiameter)intothepivotplate.
g335710
Figure6
1.Drillhere.
8.Securethesupportbrackettothepivotplate.
g335713
Figure7
1.Nut—1/2inch(2)3.Bolt—1/2x2inches(2)
2.Plate
9.Torqueall6boltsto142N∙m(105ft-lb).
10.Lowerthemachinesothatthetowpolerestson
thefrontwheels.
11.Lowertherailtothehorizontalpositionand
secureitwiththelockpin.
12.Connectthesparkplugwire.
3