Installation Instructions

FormNo.3449-435RevA

UniversalWirelessHourMeterKit

ModelNo.144-2436

InstallationInstructions

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

ProcedureDescription

Qty.

Use

Nopartsrequired

–

Preparethemachine.

Wirelesshourmeter1

Cabletie

Installthewirelesshourmeter.

Nopartsrequired

–

Connectthebattery.

PreparingtheMachine

NoPartsRequired

Procedure

1.Parkthemachineonalevelsurface.

2.Engagetheparkingbrakeand/orshiftthe

transmissionlevertotheP(PARK)position.

3.Shutoffthemachineandremovethekey.

4.Waitfortheenginetocoolcompletely(if

applicable).

5.Disconnectthenegative(-)batterycablefrom

thebatterypost.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3449-435*

PAGE 1
Form No. 3449-435 Rev A Universal Wireless Hour Meter Kit Model No. 144-2436 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure 1 2 3 Description Use Qty. No parts required – Prepare the machine. Wireless hour meter Cable tie 1 2 Install the wireless hour meter. No parts required – Connect the battery. 1 Preparing the Machine No Parts Required Procedure 1. Park the machine on a level surface. 2.
PAGE 2
3. 2 Secure the wireless hour meter to the machine wire harness using the 2 cable ties as shown in Figure 2. Installing the Wireless Hour Meter Parts needed for this procedure: 1 Wireless hour meter 2 Cable tie Procedure g370709 1. Determine the installation location for the wireless hour meter based upon application (e.g., under the hood). 2. Connect the wireless hour meter connector to the machine wire harness connector (Figure 1).