Installation Instructions

2.Ensurethatthedecalmountsurfaceofthe
supportcoverisdry.
3.Removethebackingfromthereectordecal.
4.Adherethedecaltotherear-supportcoveras
showninFigure3.
5.Repeatsteps1through4attheother
rear-supportcover.
InstallingtheDecal
TX1000Machines
1.Usealcoholandacleanragtowipecleanthe
mountingsurfaceofthetankplatewhereyou
willapplythereectordecal(Figure4).
g345322
g345321
Figure4
1.13mm(1/2inch)—inboard
ofbendradius
3.Reectordecal
2.13mm(1/2inch)
4.Tankplate
2.Ensurethatthedecalmountsurfaceofthetank
plateisdry.
3.Removethebackingfromthereectordecal.
4.Adherethedecaltothetankplateasshownin
Figure4.
5.Repeatsteps1through4attheothertankplate.
2