Installation Instructions

8
InstallingtheCEBeltCover
Partsneededforthisprocedure:
1
Hex-headbolt(1/4x3/4inch)
1
Washer(5/16x3/4inch)
1
Washer(1/4x1/2inch)
1Retainer
InstallingtheCEBeltCoverBolt
1.Assemblethewasher(5/16x3/4inch)tothe
hex-headbolt(1/4x3/4inch)asshowninFigure
12.
g351271
Figure12
132cmMowerDeckShown
1.Washer(5/16x3/4inch)5.Washer(1/4x1/2inch)
2.Hex-headbolt(1/4x3/4
inch)
6.Retainer
3.Plasticplug
7.Clipnut
4.Beltcover
8.CEbelt-coverbracket
2.Inserttheboltandwasherthroughtheholein
thetopofthebeltcoverfromtheOEMblower
anddrivekit(Figure12).
3.Fromthebottomofthebeltcover,assemblethe
washer(1/4x1/2inch)andretaineroverthe
hex-headboltthreads(Figure12).
Ensurethattheboltheadandwasherare
positionedushwiththeuppersurfaceofthe
beltcoverandthewasherandretainerareush
withthebottomsurfaceofthecover.
InstallingtheBeltCover
1.Unlatchtheblowerandpullitoutpartially.
2.Alignthebeltcoverwithnotchesinthedeck
anges(Figure12).
3.Alignthehex-headboltinthecoverwiththeclip
nutonthebelt-coverbracket.
4.Securethebeltcovertothecoverbracketwith
thehex-headbolt(Figure12).
5.Installtheplasticplugintothecover(Figure12).
6.Opentheblowerlatchpin,closetheblowerto
thedeck,andsecurethelatchpintothechute
bracket.
11