Installation Instructions

FormNo.3451-356RevA

USBKit

ZMaster

2000SeriesRidingMower

ModelNo.145-8458

InstallationInstructions

Installation

PreparingtheMachine

1.Parkthemachineonalevelsurface.

2.Disengagetheblade-controlswitch.

3.Movethemotion-controlleversoutwardtothe

NEUTRAL-LOCKposition.

4.Engagetheparkingbrake.

5.Shutofftheengineandremovethekey.

InstallingtheKit

1.Removetheplugonthecontrolpanel.

g379887

Figure1

2.ConnecttheUSBporttothewireharness

adapterandinstalltheassembly.

g379885

Figure2

3.LocatetheUSBwireconnectoronthemainwire

harness.CutthecabletiesecuringtheUSB

harnesstothemachine.

g379886

Figure3

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3451-356*

PAGE 1
Form No. 3451-356 Rev A USB Kit Z Master® 2000 Series Riding Mower Model No. 145-8458 Installation Instructions Installation 2. Connect the USB port to the wire harness adapter and install the assembly. Preparing the Machine 1. Park the machine on a level surface. 2. Disengage the blade-control switch. 3. Move the motion-control levers outward to the NEUTRAL-LOCK position. 4. Engage the parking brake. 5. Shut off the engine and remove the key. Installing the Kit 1.
PAGE 2
4. Connect the USB wire harness connector to the adapter.