Service Manual

ENGINE

4-3GT Series Tractors Service Manual

13. Mark either the throttle or choke cable and corre-

sponding engine bracket to more easily identify them

upon installation (the choke is marked with tape in

the photo below) (Fig. 394).

15. Unhook the throttle and choke cable z-bends from

the engine brackets (Fig. 396).

Fig 394 PICT-7591

Fig 396 PICT-7597

16. Slide the throttle and choke cables out of the cable

tie and the r-clamp located on the left side of the

engine (Fig. 397).

14. Loosen the cable clamp securing the throttle and

choke cable to the engine bracket (Fig. 395).

A. Choke (outside linkage plate)

B. Throttle (inside linkage plate)

Fig 397 PICT-7601

Fig 395 PICT-7596