Service Manual

GEAR DRIVE SYSTEM

5-22 GT Series Tractors Service Manual

CVT Transmission Service

CVT Transmission Housing Teardown

26. Install 4 screws securing the shift cover to the frame

(Fig. 506).

28. Install the transmission drive belt. Refer to “Trans-

mission Drive Belt Installation” on page 5-3.

29. Install the mower deck. Refer to “50” Mower Deck

Installation” on page 7-8.

30. Operate the tractor to ensure all controls operate

properly.

Fig 506 PICT-7712

2. Remove the upper housing from the lower housing

assembly (Fig. 509).

27. Slide the shift knob onto the shift rod (Fig. 507).

Fig 509 PICT-8274a

Fig 507 PICT-7632

Note: Transaxle shown does not have grease, for

photo clarity. Clean and inspect all parts after

disassembly. Apply a small amount of grease

to all moving parts and needle bearings prior

to reassembly.

1. Remove the 23 bolts securing the housing halves

together (Fig. 508).

Fig 508 PICT-8272a