Service Manual

HYDROSTATIC DRIVE SYSTEM
6-15GT Series Tractors Service Manual
6
9. Install a hairpin cotter securing the bypass lever and
spring to the bypass bracket on the transmission
(Fig. 693).
11. Position the actuator bracket with the spring switch
to the slot in the transmission (Fig. 695).
Fig 693 PICT-7556
Fig 695 PICT-7574
12. Plug the harness wire into the actuator bracket
spring switch (Fig. 696).
10. Position the ground wire to the transmission bracket
and install a screw to secure it (Fig. 694).
Fig 696 PICT-7534
Fig 694 PICT-7544