Service Manual

MOWER DECK
7-16 GT Series Tractors Service Manual
7
13. Install a bearing into the pulley side of the spindle
housing (Fig. 793).
15. Install the spindle shaft and shoulder spacer assem-
bly into the spindle housing (Fig. 795).
Fig 793 PICT-7750a Fig 795 PICT-8049a
16. Place the spindle housing into a vise.
17. Install the pulley (Fig. 796).
14. Install a shoulder spacer onto the spindle shaft
cupped side down (Fig. 794).
Fig 796 PICT-8048a
Fig 794 PICT-8050a