Service Manual

MOWER DECK
7-30 GT Series Tractors Service Manual
7
3. Using a breaker bar or ratchet, rotate the idler brack-
et forward and remove the deck belt from around the
electric PTO clutch (Fig. 843 and Fig. 844).
A. Idler pulley B. 3/8” Square hole
Fig 843 ¿J
Fig 844 PICT-7830
A
B
5. Repeat the above step on the tractor’s right side.
6. Gently slide the cutting deck toward the front of the
tractor allowing the hooks on the deck to release
themselves from the deck stabilizer rod (Fig. 846).
4. From the left side of the tractor, locate the deck
support pin on the rear left side of the deck. Pull the
deck support pin outward to release the deck from
the deck lift arm. Rotate the pin so it rests on the
deck hanger bracket (Fig. 845).
Fig 846 PICT-7836
Fig 845 PICT-7833