Service Manual

MOWER DECK

7-42 GT Series Tractors Service Manual

4. Remove the spindle assembly from the vise and

remove the spindle shaft and spacer from the

spindle housing (Fig. 884).

Fig 884 PICT-7901

5. Remove the bearing and two spacers from the pulley

side of the housing (Fig. 885).

Fig 885 PICT-7903

6. Remove the second bearing from the blade side of

the spindle housing (Fig. 886).

Fig 886 PICT-7904

7. Inspect the bearings and spacers. Replace if worn or

damaged.

8. Install a bearing into the blade side of the spindle

housing (Fig. 887).

Fig 887 PICT-7906