Service Manual

GEAR DRIVE SYSTEM

5-9GT Series Tractors Service Manual

7. Apply anti-seize compound to the crankshaft. Slide

the engine pulley onto the crankshaft and route the

transmission drive belt around the engine pulley

(Fig. 456).

10. Install 4 screws securing the shift cover to the frame

(Fig. 458).

Fig 456 PICT-7497

Fig 458 PICT-7635

11. Slide the shift knob onto the shift lever (Fig. 459).

8. Install the Electric PTO clutch. Refer to “Electric PTO

Clutch Installation” on page 3-30.

9. Slide the shift cover plate into the frame (Fig. 457).

Fig 459 PICT-7632

Fig 457 PICT-7636

12. Install the transmission drive belt. Refer to “Trans-

mission Drive Belt Installation” on page X-XX.