Service Manual

GEAR DRIVE SYSTEM

5-15GT Series Tractors Service Manual

23. Support the transmission.

24. Remove the 4 bolts and nuts securing the sides of

the transmission to the frame (2 bolts and 2 nuts on

each side) (Fig. 478).

26. Remove the variable speed pulley from the trans-

mission (Fig. 480).

Fig 478 PICT-7670

Fig 480 PICT-7676

27. Remove the bolt and washer securing the wheel hub

assembly to the transmission axle shaft. Remove the

wheel hub from the axle shaft (Fig. 481).

25. Carefully lower the transmission from the machine

(Fig. 479).

Note: Variable speed pulley will be unsecured.

Fig 481 PICT-7679a

Fig 479 PICT-7677