Service Manual

GEAR DRIVE SYSTEM

5-18 GT Series Tractors Service Manual

8. Install a bolt, nut and a self tapping screw to secure

the front of the transmission to the transmission

bracket (Fig. 490).

10. Hook the brake control spring to the rear end of the

brake control rod (Fig. 492).

Fig 490 PICT-7667

Fig 492 PICT-7662

11. Insert the front end of the brake control rod into the

brake linkage (Fig. 493).

9. Insert the brake control rod through the hole in the

transmission bracket (Fig. 491).

A. Bolt and nut B. Self tapping screw

Fig 493 PICT-7698

Fig 491 PICT-7666