Service Manual

GEAR DRIVE SYSTEM

5-12 GT Series Tractors Service Manual

13. Raise the machine.

14. Remove the 4 bolts securing the variable speed

pulley assembly to the transmission (Fig. 469).

Fig 469 PICT-8525

15. Tilt the variable speed pulley forward and remove

the belt from it (Fig. 470).

Fig 470 PICT-7642

10. Loosen the 8 bolts securing the rear wheels to the

wheel hub assemblies (4 on the left and 4 on the

right) (Fig. 467).

Fig 467 PICT-7502a

11. Raise and support the rear of the machine.

12. Remove the 8 lug nuts and remove the 2 wheel

assemblies from the wheel hubs (Fig. 468).

Fig 468 PICT-7503a