Service Manual

GEAR DRIVE SYSTEM

5-28 GT Series Tractors Service Manual

Differential Axle Assembly Service

Note: Differential is serviced as an assembly.

23. Remove the bolt and washer securing the wheel hub

assembly to the transmission axle shaft. Remove the

wheel hub from the axle shaft (Fig. 530).

Note: Discard the bolt. It is a patch bolt and must be

replaced upon installation.

24. Slide the 2 bearings off the axle (Fig. 531).

Fig 530 PICT-8314a

Fig 531 PICT-8315a

27. Slide 2 bearings onto the axle shaft (Fig. 533).

25. Repeat steps 23 and 24 to remove the opposite

bearings and wheel hub assembly.

26. Inspect the 4 bearings. Replace if worn or damaged

(Fig. 532).

Fig 533 PICT-8315a

Fig 532 PICT-8318a