Service Manual

GEAR DRIVE SYSTEM

5-44 GT Series Tractors Service Manual

Variable Speed Pulley Service

To remove the variable speed pulley from the CVT

transmission, refer to “CVT Transmission Removal” on

page 5-10.

1. Remove the center bolt and washer securing the

bearings to the pulley shaft (Fig. 596).

Fig 596 PICT-7685a

86. Install 2 bolts to secure the brake assembly to the

transmission housing (Fig. 593).

89. Install 23 bolts in a crisscross pattern to secure the

housing halves together (Fig. 595).

Fig 593 PICT-8277a

Fig 595 PICT-8272a

87. Pack the transmission with grease: 55 oz. of Shell

Darina “O” Type Grease.

88. Position the upper housing onto the lower housing

(Fig. 594).

Fig 594 PICT-8355a