Service Manual

HYDROSTATIC DRIVE SYSTEM
6-14 GT Series Tractors Service Manual
6
5. Install 2 bolts securing the front of the hydrostatic
transmission to the frame (Fig. 689).
7. Insert the bypass lever into the slot on the rear of
the machine. Slide the bypass lever onto the bypass
bracket on the transmission (Fig. 691).
Fig 689 PICT-7551
Fig 691 PICT-7559a
8. Slide the return spring onto the bypass bracket (Fig.
692).
6. Position the transmission vent tube along the left
side of the frame and install a plastic push mount tie
to secure it to the frame and wire harness (Fig. 690).
Fig 692 PICT-7558
Fig 690 PICT-7561