Service Manual

MOWER DECK

7-32 GT Series Tractors Service Manual

4. Slide the cutting deck toward the front of the tractor

allowing the hooks on the deck to catch on the deck

stabilizer rod (Fig. 851).

Fig 851 PICT-7836

5. Lower the deck lift arms by moving the deck lift lever

into the bottom notch on the right fender (Fig. 852).

Fig 852 PICT-7829

6. From the left side of the tractor, locate the deck

support pin on the rear left side of the deck. Pull the

deck support pin outward. Lift the deck into position

and release the deck support pin so that the deck is

hanging and supported by the deck support pin (Fig.

853).

Fig 853 PICT-7833

7. Repeat the above step on the tractor’s right side.

8. Route the mower deck belt around the spindles and

idlers. Refer to the belt routing decal (Fig. 854):

Fig 854 decal 1 3354-977