Operator's Manual

3352-562 Rev A

Adjusting the Cutting Height

Caution

If the engine has been running, the muffler will be hot and can severely burn you.

Keep away from the hot muffler.

Adjust the cutting height

as desired. Set all four

wheels to the same

height.

Note: To raise the mower,

move the front cutting

height levers forward and

the rear cutting height

levers rearward; to lower

the mower, move the

front levers rearward and

the rear levers forward.

1-5/8,

1-1/4,

2-3/8,

2-3/4,

3-1/8,

3-7/8,

4-1/4,

3-1/2,

m-5629

m-5605a

m-5653

FRONT

Note: Only a front cutting height lever is shown. The rear cutting height

levers operate in the opposite direction to achieve the same result.

Adjusting the Handle Height

Squeeze the bottom of

the handle halves

together (as shown) and

change the handle holes

in which the pins (A) are

mounted, as follows:

• Raise the handle

using hole (B).

• Lower the handle

using hole (C).

m-5612

m-5614