Operator's Manual

5
Slopes are a major factor related to slip and fall accidents
which can result in a severe injury. If you feel uneasy on a
slope, do not mow it.
• Watch for holes, ruts, or bumps. Tall grass can hide
obstacles.
• Do not mow near drop-offs, ditches, or embankments.
You could lose your footing or balance.
• Do not mow on wet grass. Reduced footing could cause
slipping.
Maintenance and Storage
• Keep all nuts, bolts (especially blade attachment bolts),
and screws tight to ensure that the lawn mower is in
safe working condition.
• Never store the lawn mower with gasoline in the tank
inside a building where fumes may reach an open flame
or spark.
• Allow the engine to cool before storing the lawn mower
in any enclosure.
• To reduce the fire hazard, keep the engine, muffler,
battery compartment, and gasoline storage area free of
grass, leaves, or excessive grease.
• Check the grass catcher frequently for wear or
deterioration.
• Replace worn or damaged parts.
• Use extra care when handling gasoline; gasoline vapors
are explosive.
• Never tamper with safety devices. Check their proper
operation regularly.
• Keep the lawn mower free of grass, leaves, or other
debris buildup. Clean up any oil or fuel that spills.
• Stop and inspect the lawn mower if you strike an object.
Repair the lawn mower, if necessary, before starting the
engine.
• Never attempt to make wheel height adjustments while
the engine is running.
• Grass catcher components are subject to wear, damage,
and deterioration, which could expose moving parts or
allow objects to be thrown. Frequently check the
components and replace them with the manufacturer’s
recommended parts when necessary.
• Lawn mower blades are sharp and can cut. Wrap the
blade(s) or wear gloves, and use extra caution when
servicing them.
• Do not change the speed settings on the engine.
• If you must drain the fuel from the fuel tank, do it
outdoors.
• To ensure the best performance and safety, purchase
only genuine Toro replacement parts and accessories.
• Maintain or replace safety and instruction decals when
necessary.